Options

Models

Below are the different models that we carry. Please click on the type of trailer to see more photos and details for that model.

Econo-lite Trailers

Econo-lite Single Axle Enclosed Trailers

Single and Tandem axle Econolite models

    Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 3 tubing ⅛" thick
  • Crossmember for 5 & 6 wide Z-member
  • Crossmember for 7 wide 2 x 2 tubing 14 gauge
  • Tube uprights 24" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty single rear door 5 wide (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Heavy-duty split rear doors for 6 & 7 wide (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • V-nose style aerodynamic front design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 5,000 lb rated
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 5,000 lb safety chains (Class III)

    Running Gear

  • 2,990 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand)
  • Leaf-spring axle
  • Torsion drop axles - rubber/independent suspension
  • E-Z lube wheel bearings
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • LED tail & running lights (complete trailer)
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush Jeep fenders (.080 gauge)

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36", 40", 48" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • Triple weedeater racks - lockable
  • Blower hooks & rack with tube holder
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Beaver/Dove tail
  • Electrical package - 110v
  • Single axle lbs - 5k, 6k, 7k,8k Gross Vehicle Weight (GVW)
  • Concession awnings
  • RV awnings roll-out style
  • Interior fenders

Call for other options.

Econo-lite Tandem Axle Enclosed Trailers

Tandem Axle Econolite

    Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 4⅛" thick tubing
  • Crossmember 2 x 3 tubing 14 gauge
  • Tube uprights 24" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • V-nose style aerodynamic front design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2 5/16" coupler - 13,000 lb rated
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 7,600 lb safety chains (Class IV)

    Running Gear

  • 7,000 lb Gross Vehicle Weight (GVW) - Two 3,500 lb axles with brakes (Al-Ko brand)
  • Leaf spring axles
  • E-Z lube wheel bearings
  • Four wheel electric brakes
  • 12V breakaway kit
  • 15" Bias ply trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)

    Exterior

  • LED tail & running lights (complete trailer)
  • All aluminum exterior (.024 gauge sheet)
  • Galvlum roof - Mill finish
  • All exterior hardware is zinc plated (hinges, hasp, cam bars)
  • Aluminum Jeep fenders
  • 12" Aluminum diamond plate stoneguard

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Rear interior dome light/li>
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauge steel support frame)
  • Spare tire mount - interior
  • Triple weedeater racks - lockable
  • Blower hooks & rack with tube holder
  • 12 exterior color choices
  • Aluminum diamond plate stoneguards 24" high
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb cap.)
  • Wall ties (400 lb cap.)
  • Motorcycle chocks (removable)
  • Stabilizer jacks

Call for other options.

4x6 or 4x8 Single Axle Enclosed Trailers

4 x 6 Econolite

    Frame

  • Rectangle tubular steel construction - Welded all four sides
  • Main frame runner 2 x 2 tubing ⅛" thick
  • Crossmember 2 x 2 tubing 14 gauge
  • Tube uprights 24" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty single rear door (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Aerodynamic cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 3,500 lb rated
  • Swivel jack with wheel 750 lb
  • 27" - 3,600 lb safety chains (Class III)

    Running Gear

  • 2,000 lb Gross Vehicle Weight (GVW) axle (Al-Ko brand)
  • Leaf spring axle
  • E-Z lube wheel bearings
  • 13" Bias Ply trailer tires, load range C (1 year no questions asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)

    Exterior

  • LED tail & running lights (complete trailer)
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from mill finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum round fenders

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty single rear door (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door (no spring assist)
  • Side door - 30", 32", 36" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Stabilizer jacks

Call for other options.

Single Axle Enclosed Trailers

Line Drawing - Single Axle Side View

STANDARD EQUIPMENT

    Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 3 tubing ⅛" thick
  • Crossmember 2 x 2 tubing 14 gauge
  • Tube uprights 16" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Aerodynamic front and cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 5,000 lb rated
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 5,000 lb safety chains (Class III)

    Running Gear

  • 2,990 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand)
  • Bolt-on axle brackets
  • Torsion drop axles - rubber/independent suspension
  • E-Z lube wheel bearings
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • LED tail & running lights (complete trailer)
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush Jeep fenders

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36", 40", 48" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • Triple weedeater racks - lockable
  • Blower hooks & rack with tube holder
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Beaver/Dove tail
  • Electrical package - 110v
  • Single axle lbs - 5k, 6k, 7k,8k Gross Vehicle Weight (GVW)
  • Concession awnings
  • RV awnings roll-out style
  • Interior fenders

Call for other options.

Tandem Axle

Tandem Axle

STANDARD EQUIPMENT

    Frame

  • Rectangle tubular steel construction - Welded all four sides
  • Main frame runner 2 x 5 tubing 1/8" thick
  • Crossmember 2 x 3 tubing 14 gauge
  • Tube uprights 16" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Aerodynamic front and cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2 5/16" coupler - 13,000 lb rated
  • 5,000 lb tongue jack with sand pad/foot
  • 27" - 7,600 lb safety chains (Class IV)

    Running Gear

  • 7,000 lb Gross Vehicle Weight (GVW) - Two 3,500 lb axles with brakes (Al-Ko brand)
  • Bolt-on axle brackets
  • Torsion drop axles - Rubber/Independent suspension
  • E-Z lube wheel bearings
  • Four wheel electric brakes
  • 12 volt Breakaway kit
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • LED tail & running lights (complete trailer)
  • Molded 7-way RV plug
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush Teardrop fenders (.080 Gauge)

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty single rear door (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36", 40", 48" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • Triple weedeater racks - lockable
  • Blower hooks & rack with tube holder
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Beaver/Dove tail
  • Electrical package - 110v
  • Tandem Axles lbs - 10k, 12k, 14k, 16k Gross Vehicle Weight (GVW)
  • Triple Axles lbs - 15k, 18k, 21k, 24k Gross Vehicle Weight (GVW)
  • Concession awnings
  • RV awnings roll-out style
  • Interior fenders

Call for other options.

Carhauler Enclosed Trailers

10K Deluxe Carhauler

STANDARD EQUIPMENT

    Frame

  • Rectangle tubular steel construction - Welded all four sides
  • Main frame runner 2 x 5 tubing 1/8" thick
  • Crossmember 2 x 3 tubing 14 gauge 16" on centers
  • Tube uprights and roof 16" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty ramp door - Tublular steel - 90½" between ramp cables - 76" high
  • 1/4" hardened aluminum diamond plate ramp flap
  • Beaver tail/Dove tail - Hidden from outside viewing
  • Skid roller (steel) on both rear corners - Greaseable
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2 5/16" coupler - 13,000 lb rated
  • 5,000 lb Tongue Jack with sand pad/foot
  • 27" - 11,700 lb Clevis Latch safety chains

    Running Gear

  • 7,000 lb Gross Vehicle Weight (GVW) - Two 3,500 lb axles with brakes (Al-Ko brand)
  • Bolt-on axle brackets
  • Torsion drop axles - Rubber/Independent suspension
  • E-Z lube wheel bearings
  • Four wheel electric brakes
  • 12 volt Breakaway kit
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • 8'6"/102" wide body
  • LED tail & running lights (complete trailer)
  • Extra LED running lights & 3 ID bar for better visibility
  • Molded 7-way RV plug
  • One piece aluminum roof (.040 Gauge) boned - no screws
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear ramp door
  • 2 - 15" aluminum grab handles on rear ramp
  • Aluminum brush Teardrop fenders (.080 Gauge)
  • 46" curb side door with hidden aluminum diamond plate step
  • Slam latch on side door with deadbolt
  • Brite Anodized aluminum front corners
  • Brite Anodized aluminum rear jambs & header
  • 24" aluminum diamond stoneguard

    Interior

  • White aluminum ceiling liner with closed ramp spring cover
  • Insulted ceiling
  • 4-dome lights wired to wall switch (hot)
  • 2-pouch lights to illuminate floor & ramp area, wired to wall switch (hot)
  • 4-recessed floor tie downs bolted to the crossmember (6,000 lb break strength)
  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish

    Specs

  • Overall height - 8'8" for 7,000 & 10,000 GVW trailers
  • Overall height - 8' 10" for 12,000 GVW trailer
  • Inside height - 6' 6"
  • Inside width - 97¼"
  • Between fenderwells width - 82½" for 7,000 GVW trailer
  • Between fenderwells width - 81½" for 10,000 GVW trailer
  • Between fenderwells width - 80½" for 12,000 GVW trailer
  • Fenderwells height - 6¾" for 7,000 & 10,000 GVW trailer
  • Fenderwells height - 8¾" for 12,000 GVW trailer

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Side ramp door with spring assist
  • 3" heavy duty ramp door
  • Escape door
  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • 12 exterior color choices
  • Aluminum wheels
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Electrical package - 110v
  • Tandem Axles lbs - 10k, 12k, 14k, 16k Gross Vehicle Weight (GVW)
  • Triple Axles lbs - 15k, 18k, 21k, 24k Gross Vehicle Weight (GVW)
  • RV awnings roll-out style

Call for other options.

Gooseneck

53' Gooseneck

    Frame

  • Rectangle tubular steel construction - Welded all four sides
  • Main Frame Runner 2 x 5 ⅛" thick thru 2 x 6 ¼" thick, depends on GVW
  • Crossmember 2 x 3 tubing 14 gauge
  • Tube uprights and roof 16" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood
  • Aerodynamic front and cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2 5/16" ball - 30,000 lb. rated for Goosneck or Kig Pin 30,000 lb. rated for fifth wheel
  • Double 10,000 lb. Gooseneck drop leg jack with large sand pad/foot (tied together/one handle)
  • 8' Goosneck (28' overall trailer = 8' neck 20' box)
  • 40" - 26,400 lb. 3/8" safety chains with latch hook on each end
  • Bogey wheel roller welded to rear of trailer (greaseable roller)

    Running Gear

  • 10,000 lb. GVW - two 5,000 lb. axle with brakes sizes 28' thru 34'
  • 12,000 lb. GVW - two 6,000 lb. axle with brakes sizes 28' thru 36'
  • 14,000 lb. GVW - two 7,000 lb. axle with brakes sizes 28' thru 38'
  • 16,000 lb. GVW - two 8,000 lb. axle with brakes sizes 28' thru 40'
  • 15,000 lb. GVW - triple 5,000 lb. axle with brakes sizes 28' thru 40'
  • 18,000 lb. GVW - triple 6,000 lb. axle with brakes sizes 28' thru 52'
  • 21,000 lb. GVW - triple 7,000 lb. axle with brakes sizes 28' thru 52'
  • 24,000 lb. GVW - triple 8,000 lb. axle with brakes sizes 28' thru 52'
  • Bolt-on axle brackets
  • Torsion drop axles - Rubber/Independent suspension (Al-Ko brand)
  • E-Z lube wheel bearings
  • Four wheel electric brakes - Tandem, Six wheel electric brakes - Triple
  • 12 volt Breakaway kit (5 Amp)
  • 15" through 16" radial trailer tires, load range "C" through "F" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process / rust prohibitive)

    Exterior

  • LED tail & running lights (complete trailer)
  • Molded 7-way RV plug - 10' long
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear ramp door
  • Aluminum brush Teardrop fenders (.080 Gauge)

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

    Specs

  • Overall height - 8'8" for 7,000 & 10,000 GVW trailers
  • Overall height - 8' 10" for 12,000 GVW trailer
  • Inside height - 6' 6"
  • Inside width - 97¼"
  • Between fenderwells width - 82½" for 7,000 GVW trailer
  • Between fenderwells width - 81½" for 10,000 GVW trailer
  • Between fenderwells width - 80½" for 12,000 GVW trailer
  • Fenderwells height - 6¾" for 7,000 & 10,000 GVW trailer
  • Fenderwells height - 8¾" for 12,000 GVW trailer

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Rear ramp door with spring assist
  • Side door - 30" , 32" , 36" , 40" , 48" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • V-Nose style front design
  • Additional heights
  • .040 gauge sheet - exterior
  • Hydraulic jack - 12,000 lb. capacity with controls and battery (Big Foot) - in addition to 10,K manual jacks
  • Partition wall
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high underside of gooseneck area
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • E-track (welded to wall for strength)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Electrical package - 110v
  • Tandem Axles lbs - 10k, 12k, 14k, 16k Gross Vehicle Weight (GVW)
  • Triple Axles lbs - 15k, 18k, 21k, 24k Gross Vehicle Weight (GVW)
  • RV awnings roll-out style

Call for other options.

Motorcycle Trailer Packages

Single Axle Enclosed Trailers - Motrcycle Package

2 Tone Motorcycle Package

    Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 3 tubing ⅛" thick
  • Crossmember 2 x 2 tubing 14 gauge
  • Tube uprights 16" on center (1"x 1" and 1"x 2" 16 gauge tubing)
  • Rear ramp door with spring assist and greaseable hinges (Steel tubing with 3/4" exterior plywood)
  • Aerodynamic front and cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 5,000 lb rated
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 5,000 lb safety chains (Class III)

    Running Gear

  • 2,990 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand)
  • Bolt-on axle brackets
  • Torsion drop axles - rubber/independent suspension
  • E-Z lube wheel bearings
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • LED tail & running lights (complete trailer)
  • Flat 4-way plug
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush teardrop fenders (.080 gauge)

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Included Equipment with Motorcycle Package

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • Aluminum diamond plate stoneguard 24" high
  • Spare tire with mount - inside
  • 2 side scoop vents (1 Front, 1 Rear)
  • 2 rear drop leg stabilizer jacks with pin
  • No charge for color sides, 12 exterior color choices
  • Motorcycle chocks (removable) and recessed floor ties
  • 5x10: 1 wheel chock and 4 recessed floor ties (1 mounting bracket)
  • 6x10 - 8x16: 2 wheel chocks and 6 recessed floor ties (3 mounting brackets)
  • 7x18 - 8x18: 4 wheel chocks and 9 recessed floor ties (6 mounting brackets)

    Common Optional Equipment

  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Aluminum diamond plate corner guards or polished aluminum
  • E-track (welded to wall for strength)
  • Textured non-skid flooring (floor &mamp; ramp)
  • Aluminum diamond plate ramp flap 1/8"
  • Deluxe aluminum trim package - aluminum wheels, diamond plate fenders and chome jambs
  • 24" Aluminum diamond plate runner (both, sides & rear)

Call for other options.

Tandem Axle Enclosed Trailers - Motorcycle Package

    Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 3 tubing ⅛" thick
  • Crossmember 2 x 3 tubing 14 gauge
  • Tube uprights 16" on center (1"x 1" and 1"x 2" 16 gauge tubing)
  • Rear ramp door with spring assist and greaseable hinges (Steel tubing with 3/4" exterior plywood)
  • Aerodynamic front and cambered roof design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2 5/16" coupler - 13,000 lb rated
  • 5,000 lb tongue jack with sand pad/foot
  • 27" - 7,600 lb safety chains (Class IV)

    Running Gear

  • 7,000 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand)
  • Bolt-on axle brackets
  • Torsion drop axles - rubber/independent suspension
  • E-Z lube wheel bearings
  • Four wheel electric brakes
  • 12V breakaway kit
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

    Exterior

  • LED tail & running lights (complete trailer)
  • Moulded 7-way RV plug
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush teardrop fenders (.080 gauge)

    Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Note: Above items are subject to change without notice.

    Included Equipment with Motorcycle Package

  • Rear ramp door with spring assist
  • Side door - 30", 32", 36" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Aluminum diamond plate stoneguard 24" high
  • Spare tire with mount - inside
  • 2 side scoop vents (1 Front, 1 Rear)
  • 2 rear drop leg stabilizer jacks with pin
  • No charge for color sides, 12 exterior color choices
  • Motorcycle chocks (removable) and recessed floor ties
  • 5x10: 1 wheel chock and 4 recessed floor ties (1 mounting bracket)
  • 6x10 - 8x16: 2 wheel chocks and 6 recessed floor ties (3 mounting brackets)
  • 7x18 - 8x18: 4 wheel chocks and 9 recessed floor ties (6 mounting brackets)

    Common Optional Equipment

  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Aluminum wheels
  • Coat bar
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Aluminum diamond plate corner guards or polished aluminum
  • E-track (welded to wall for strength)
  • Textured non-skid flooring (floor &mamp; ramp)
  • Aluminum diamond plate ramp flap 1/8"
  • Deluxe aluminum trim package - aluminum wheels, diamond plate fenders and chome jambs
  • 24" Aluminum diamond plate runner (both, sides & rear)

Call for other options.

Open Trailers

Open Utility Single and Tandem Axle Trailers

Open Utility Trailers

STANDARD EQUIPMENT

    Frame

  • Main frame runner 2" x 3" x 3/16" thick
  • Crossmember angle 2" x 3" x 3/16" thick
  • Top railing 2" x 2" x 1/8" thick
  • Uprights 12" high angle 2" x 2" x 1/8" thick
  • All 5 wide get HD tongue - 3" channel
  • All 6'4" Single or Tandem & 6'10" wide get HD tongue - 4" channel
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • 4' ramp (1,000 lb capacity) - Removable
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 5,000 lb rated - Single axle
  • 2 5/16" coupler - 13,000 lb rated - Tandem axle
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 5,000 lb safety chains (Class III) - Single Axle
  • 27" - 7,600 lb safety chains (Class IV) - Tandem Axle

    Running Gear

  • 2,990 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand) - Single Axle
  • 6,000 lb Gross Vehicle Weight (GVW) - two 3,500 lb axles with brakes (Al-Ko brand) - Tandem Axle
  • Leaf spring axle
  • E-Z lube wheel bearings.
  • 15" bias ply trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)

    Exterior

  • 2 x 8 pressure treated planking on all trailers

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Expanded metal sides - 12", 24", 36" or 48"
  • Expanded metal basket 2' x 2' - lockable
  • Triple weedeater racks - lockable
  • HD tube gates with HD top railing - 6'10" wide lawn trailer package
  • Tandem axles without brakes - 2,990 lb GVW
  • Spare tire mount - lockable
  • Aluminum tongue V-shaped tool box - lockable
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Motorcycle chocks (removable)

Call for other options.

Open Equipment Trailers

Gooseneck Equipment Trailers

STANDARD EQUIPMENT

    Frame

  • Main frame runner and tongue 6" channel for 7k thru 14k GVW
  • Main frame runner and tongue 8" channel for 16k and up GVW
  • Crossmember 3" channel 16" on center
  • Side straping rail 3/8" thick with stack pockets
  • Jig welded technology - frame, ramp
  • Two adjustable 4' ramps - 3" channel - Removable
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • Adjustable 2 5/16" ball or lunette / Pintle Eye coupler - 20,000 lb rated
  • 7,000 lb drop leg tongue jack with sand pad / foot
  • 7,600 lb thru 26,400 lb safety chains with latch hook
  • 24" beaver / dove tail - 3/16" steel diamond plate

    Running Gear

  • 7K, 10K, 12K, 14K, 16K GVW - two axles with brakes (Al-Ko brand)
  • Leaf spring axle
  • E-Z lube wheel bearings
  • Four wheel electric brakes
  • 12 volt breakaway kit (5 Amp)
  • 15" thru 16" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)

    Exterior

  • 2 x 8 pressure treated planking
  • Diamond plate Jeep style fenders - 14 gauge steel
  • Molded 7-way RV plug

Note: Above items are subject to change without notice.

    Common Optional Equipment

  • Spare tire mount - lockable
  • Aluminum tongue V-shaped tool box - lockable
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Welded D-ring
  • Triple axle lbs - 15k, 18k, 21k,24k Gross Vehicle Weight (GVW)
  • Oil bath wheel bearings
  • Torsion axles - Rubber independent suspension
  • Gooseneck / fifth wheel
  • Implement / deckover

Call for other options.